View 3N253_181303.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2KBP005M THRU 2KBP10M SERIES 3N253 THRU 3N259
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Case Style KBPM
0.600 (15.24) 0.125 x 45o (3.2) 0.560 (14.22)
Forward Current - 2.0 Amperes
FEATURES
0.460 (11.68) 0.420 (10.67)
0.500 (12.70) 0.460 (11.68)
60 (15.2) MIN. 0.060 (1.52) 0.160 (4.1) 0.140 (3.6)
0.50 (12.7) MIN.
0.034 (8.6) 0.028 (7.6) DIA.
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 This series is UL listed under the Recognized Component Index, file number E54214 Glass passivated chip junctions Typical IR less than 0.1A High case dielectric strength Ideal for printed circuit boards High temperature soldering guaranteed: 260C/10 seconds at 5 lbs. (2.3kg) tension
0.200 (5.08) 0.180 (4.57)
0.105 (2.67) 0.085 (2.16)
MECHANICAL DATA
Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.06 ounce, 1.7 grams
Polarity shown on front side of case: positive lead by beveled corner
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
SYMBOLS
2KBP 005M 3N253
2KBP 01M 3N254
2KBP 02M 3N255
2KBP 04M 3N256
2KBP 06M 3N257
2KBP 08M 3N258
2KBP 10M 3N259
UNITS
* Maximum repetitive peak reverse voltage * Maximum RMS voltage * Maximum DC blocking voltage * Maximum average forward output rectified current at TA=55C * Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150C Rating for fusing (t < 8.3ms) * Maximum instantaneous forward voltage drop per leg at 3.14A * Maximum DC reverse current at rated DC blocking voltage per leg Typical thermal resistance per leg (NOTE 2) * Operating junction and storage temperature range TA=25C TA=125C
VRRM VRMS VDC I(AV) IFSM I2t VF IR CJ RJA RJL TJ, TSTG
50 35 50
100 70 100
200 140 200
400 280 400 2.0 60.0 15.0 1.1 5.0 500.0 25.0 30.0 11.0 -55 to +165
600 420 600
800 560 800
1000 700 1000
Volts Volts Volts Amps Amps A2sec Volts A pF C/W C
Typical junction capacitance per leg (NOTE 1)
NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.47 x 0.47" (12 x 12mm) copper pads * JEDEC registered values
4/98
RATINGS AND CHARACTERISTICS CURVES 3N253 THRU 3N259 / 2KBP005M THRU 2KBP10M
FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT
60 HZ RESISTIVE OR INDUCTIVE LOAD
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG
AVERAGE FORWARD OUTPUT CURRENT, AMPERES
PEAK FORWARD SURGE CURRENT, AMPERES
2.0
60 50 40 30 20 10
1.0 CYCLE
TJ=150C SINGLE SINE-WAVE (JEDEC Method)
1.5
1.0
P.C.B. MOUNTED WITH 0.47 x 0.47" (12 x 12mm) COPPER PADS
0.5
CAPACITIVE LOAD Ipk/IAV=5.0 Ipk/IAV=10 Ipk/IAV=20 (PER LEG)
0 100 120 140 160 170
1
10
NUMBER OF CYCLES AT 60 HZ
100
0 20
40
60
80
AMBIENT TEMPERATURE, C
FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG
20 10
INSTANTANEOUS FORWARD CURRENT, AMPERES
TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE
100
TJ=125C
10
TJ=100C
1
1
0.1
TJ=25C
0.1
0.01 0
20
40
60
80
100
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
100
JUNCTION CAPACITANCE, pF
TJ=25C f=1.0 MHz Vsig=50mVp-p
10
1 0.1
1
10
100
REVERSE VOLTAGE, VOLTS

▲Up To Search▲

Price & Availability of 3N253

	To Download 3N253 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .